Mikrosil® Casting Putty Kit
Mikrosil® Casting Putty Kit
Mikrosil® Casting Putty is used when highly detailed castings of tool and jimmy marks are required or for lifting dusted latent prints off a rough or round surface. Mikrosil® has been formulated to give excellent rendering of small details, highest contrast for microscopic observations, good releasing ability for the cast, and short curing time.
Mikrosil® is available in four colors:
• Brown - the color which many tool mark examiners
prefer; the dark color increases the visibility of
detail in the casts made from tool marks, firing
pin marks, breech face marks, and other marks
on cartridge casings.
• Gray - is preferred by other tool mark examiners
who photograph the contrast between the
light-colored surface and shadows produced from
side-lighting.
• White or Black - can be used to lift dusted latent
fingerprints from rough or textured surfaces where
regular lift tape will fail. Use white Mikrosil® with
black powders;use black Mikrosil® with white,
silver, or fluorescent powders.
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast. Within six to eight minutes, the cast will be set. Mikrosil® even works in below freezing temperatures, creating a perfect cast within fifteen minutes!
FS-CMMIKCAT
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast.
$19.95
|
FS-CMMIKB
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast.
$41.00
|
FS-CMMIKBR
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast.
$41.00
|
FS-CMMIKG
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast.
$41.00
|
FS-CMMIKW
To use Mikrosil®, simply mix the putty and catalyst on a mixing card with the supplied spatula and apply it to the surface being cast.
$41.00
|
©1999-2024 Connectweb Technologies, Inc.