|
|
| | |
|
EVIDENCE CASTING
Casting Frames
|
Our .040” thick, adjustable aluminum Casting Frames are used to restrict the flow and control the depth of plaster, dental stone, or silicone casting material when making casts at crime scenes.
|
|
FS-FRAMEF
|
FOOTPRINT CASTING FRAME -12"e;-20"e; X 8.5"e; X 1.75"e; |
$22.50 |
|
|
FS-FRAMET
|
TIRE PRINT CASTING FRAME - 20.25"e;-24"e; X 12"e; X 1.75"e; |
$34.50
|
|
Casting Kits
|
Our Advanced Tire and Footprint Dental Stone Casting Kit contains all the necessary components for making detailed dental stone reproductions of impressions found in sand, mud, dirt, and snow, along with items to properly mark the casts as collected evidence. The Dental Stone Casting Material provides you with a casting of unbelievable strength - so strong that the 3” x 5” wire cast reinforcement mesh used in our Advanced Tire and Footprint Plaster Casting Kit is not required.
|
|
FS- CKADSC
|
Advanced Tire and Footprint Dental Stone Casting Kit
|
$320.65
|
|
|
FS- CKASC
|
Advanced Silicone Casting Kit
|
$415.55
|
|
|
FS- CKAPC
|
Advanced Tire and Footprint Plaster Casting Kit
|
$268.90
|
|
|
FS- CKBSC
|
Basic Liquid Silicone Casting Kit |
$140.55 |
|
|
FS- CKBPC
|
Basic Tire and Footprint Plaster Casting Kit |
$176.60 |
|
Casting Release Spray
|
This aerosol can contains a fast drying, clear acrylic hardener for footprints and tire tracks found in sand and dirt. Our Acrylic Hardener can be used with plaster, dental stone, and silicone rubber casting material. Once dried, the hardener helps prevent the distortion of the impression from the weight of the casting material.
|
FS-LCCRS9
|
TIRE & FOOTPRINT CASTING RELEASE SPRAY, 9 OZ |
$15.50
|
|
|
Impression Hardeners
|
FS-LCSDH11
|
Acrylic Sand and Dirt Hardener |
$19.20 |
|
Dust, Sand, and Dirt Hardener Kit
|
This kit contains all the necessary components for preparing a footprint or tire track for casting with plaster, dental stone, or silicone rubber casting materials. This product helps prevent the impression from deforming due to the weight of the casting material. Kit components are also offered separately.
Kit Components:
1 ea. 64 oz. of Hardener Solution
1 ea. 8 oz. Hardener Solution Spray Bottle
1 ea. 8 oz. Pump Head Cleaning Solution
|
FS-CKDSDH
|
DUST, SAND, & DIRT HARDENER KIT |
$39.95
|
|
|
FS-LCDSDH64
|
DUST, SAND, & DIRT HARDENER, 64 OZ |
$29.95
|
|
|
FS-LC8
|
SPRAYER CLEANER ONLY, 8 OZ |
$13.50
|
|
|
Wax Hardener for Snow Impressions
|
Taking a cast impression in snow always involves the risk of damaging the impression with your casting material. Impressions in powdery snow can distort or crumble during the pouring process and the exothermic reactions of casting agents can cause melting.
Our Wax Hardener is formulated to prime, seal, and protect delicate impressions before and during the application of a casting material. Use it to set the impression before casting, help protect against melting, and seal out excess water that might dilute your casting mix. Simply spray a few coats of wax on the impression, let it harden, then cast the impression following your normal procedures.
|
FS-LCWH6
|
WAX HARDNER, 6.5 6OZ |
$31.25 |
|
|
Flexible Mixing Bowls
|
FS-BOWLS
|
MIXING BOWL 3.25"e; X 2.25"e;, 150 ml
|
$9.95
|
|
|
FS-BOWLM
|
MIXING BOWL 4.25"e; X 2.75"e;, 350 ml
|
$12.50
|
|
|
FS-BOWLL
|
MIXING BOWL 4.75"e; X 3.625"e;, 600 ml
|
$18.95
|
|
|
FS-BOWLXL
|
MIXING BOWL 5"e; X 4.5"e;, 850 ml
|
$19.95
|
|
| |
| | |
|
|
|